CD Cable Tie Base Weld Studs

CD Cable Tie Base Weld Studs_Image1

Complete Stud Welding CTB weld studs are a superior option to securing cable tie bases compared to adhesives or screws.

To install, first weld the wire tie base in place, then break off the top portion of stud and insert cable tie. Holds wire bundle up to 1 in diameter.

The retaining stud is a .188 diameter stainless steel or aluminum knock-off style CD stud.

The pull off strength of the cable tie base exceeds that of a typical 3/16 nylon wire tie.

For application, dimensional, in stock, technical details and welding assistance, please contact your Complete Stud Welding representative.

CD Cable Tie Base Weld Studs_Image1



A B C D E F G H
1
Cable Tie Base Specifications Standard Accessories
2
Height Length Width Slot Height Slot Width B Collet
Standard
1-3/8” Long
Long Collet
2-3/8” Long
Euro Collet
1.80” Long
3
C L D A W P/N * P/N ** P/N
4
0.39 0.875 0.625 0.09 0.325 CDB-018 CDBN-018 CDBS-018
5
* Note, requires B Stop, see Accessories for details
6
** Note, requires Long Style Stops, see Accessories for details

 

A B C D E F G H I J K L M N O P Q R S
1
Nylon 6/6 Properties
2
Property ASTM Method Test Condition Units Nylon 6/6
3
Tensile Strength D368 +73 Degrees F, 50% RH kpsi 11.2
4
Elongation at break D368 +73 Degrees F, 50% RH % > 299
5
Yield Strength D368 +73 Degrees F, 50% RH kpsi 8.5
6
Shear Strength D732 Dry as Molded kpsi 9.6
7
Deformation Under Load D621 2,000 psi; +122 F, DAM % 1.4
8
IZOD Impact D256 +73 Degrees F, 50% RH ft lb/in 2.1
9
Tensile Impact Strength D1822 +73 Degrees F,
Long Specimen; DAM
ft lb/in 240
10
Melting Point D789 Fisher-Johns Degrees F 491
11
Thermal Conductivity DAM Conche-Fitch BTU-in/h*ft*F 1.7
12
Brittleness Temperature D746 50% RH Degrees F -85
13
Oxygen Index D2683 DAM %O 28
14
Oxygen Index D2683 50% RH %O 31
15
UL Flammability UL 94 DAM V-2
16
UL Flammability UL 95 50% RH V-2
17
Nylon 6/6 NBS Smoke Generation
18
Test Parameters Specific Optical Density
19
Sample Thickness UL Flammability Energy Source at Maximum
Smoke Accumulation
At 2 Minutes
20
1/16 94 V-2 Radiant (2.5 watts/sp cm) 13 0
21
1/8 94 V-2 Radiant (2.5 watts/sp cm) 26 1
22
Nylon 6/6 Temperature Index
23
Temperature Index
24
Minimum Thickness Electrical Degrees C Mechanical w/o Impact
Degrees C
Hot Wire Ignition (sec)
25
0.028 125 65 11.8
26
0.058 125 85 15
27
Weld Stud Dimensions and Properties
28
Stud Diameter Flange Diameter Length Length after knock-off * Material Type ** Ultimate Tensile
29
0.19 0.265 0.78 0.18 302 SS 85 KPSI
30
* Excludes flange thickness
31
** Along with 304 SS, meets requirements of 18-8 Stainless Steel

Product Images


311

312


314

316


317

318