Annular Ring (Navy) Weld Studs

Annular Ring (Navy) Weld Studs_Image1
Annular Ring (Navy) Weld Studs_Image2

Complete Stud Welding TAR weld studs are available in mild steel and stainless steel materials.


TAR studs are used to install insulation materials. After the stud is welded in place, the insulation is impaled over the stud and then the mushroom navy cap is installed onto the stud with a hammer. The cap is now locked onto the stud.

For application, dimensional and in stock assistance, please contact your Complete Stud Welding representative.


Annular Ring (Navy) Weld Studs_Image1


A B C D E F G H I J K L
1
Stud Specifications Standard Accessories
2
Base
Diameter
Knurled
Diameter
Groove
Length
Min. Length Flash Dimensions
3
D C A L E F Ferrule Foot Grip Chuck
4
0.188 0.175 0.312 0.750 0.281 0.094 F019-F B-1N GN-019 CN-019
5

 

7
Recommended Hardware Part Number
8
Mushroom Navy Cap – Aluminum TAR-001

Annular Ring (Navy) Weld Studs_Image2


To order or specify give: Stud Code, Dimensions C x L, A, Material and Quantity
Example: TAR, .188 x 7/8, (BW), Stainless, 5000 pcs.
Specify (L) Length on a Before Weld basis by indicating “BW”
or on an After Weld basis by indicating “AW.”