CD Weld Pins

Category: Tag:
CD Weld Pins_Image1

Weld pins are commonly used to attach blanket insulation to ducts, ovens, boilers and hot/cold equipment. The pins are welded in place, the insulation impaled over the pin and then self locking washers are installed over the pin to secure the insulation.

The CD process is used to weld CD type studs to sheet metal and plate.

For application, dimensional and technical assistance, please contact your Complete Stud Welding representative.

Materials: Low carbon steel (copper plated), stainless steel 18-8 and aluminum are standard. Other materials are available upon request. Material is annealed as required.

Plating: Galvanized Weld Pins and other coatings are available.

Accessories: See the Accessories section for details. P/N’s CDB-013, CDB-013A, CDBN-013, CDBS-013, CIP-014-075 and CDB-010, CDB-010A, CDBN-010, CDBS-010, CIP-010-075Self Locking Washers: See Technical Details in this section.

Self Locking Washers: See Technical Details in this section.

CD Weld Pins_Image1



A B C D E F G H
1
Stud Specifications
2
10 Gauge 12 Gauge
3
Stud
Diameter
Flange
Diameter
Standard
Lengths
Pounds Per
1,000 Pieces
Stud
Diameter
Flange
Diameter
Standard
Lengths
Pounds Per
1,000 Pieces
4
Z D L Z D L
5
10 Gauge
0.135
0.220 1 5 12 Gauge
0.105
0.175 0.75 2
6
1.5 7 1 3
7
2 8 1.25 4
8
2.5 11 1.5 5
9
3 13 2 6
10
3.5 15 2.5 7
11
4 17 3 8
12
4.5 18 3.5 9
13
5 21 4 11
14
5.5 22 4.5 12
15
6 25 5 13
16
6.5 26 5.5 14
17
7 29 6 15
18
8 33 6.5 16
19
9 37 7 17
20
10 41 8 20
21
9 24

Product Images

388


387

390