Shoulder Annular Groove Weld Studs

Add to Quote List
Category: Tag:


Complete Stud Welding TAG weld studs are available in mild steel and stainless steel materials.

TAG studs are used to make roof or wall systems and to cover and insulate tanks. The speed clip is commonly used to secure insulation material impaled over the stud prior to capping. After the sheet metal skin is impaled over the annular grooves, the cap-setting tool and a hammer are used to install the setting caps onto the TAG studs.

For application, dimensional and in stock assistance, please contact your Complete Stud Welding representative.

Shoulder Annular Groove Weld Studs_Image1

Shoulder Annular Groove Weld Studs_Image2


A B C D E F G H I J K L
1
 Stud Specifications Standard Accessories
2
 Base
Diameter		 Groove
Diameter		 Groove
Length		 Min. Length Flash Dimensions
3
 D C A L E F Ferrule Foot Grip Chuck
4
 0.312 0.188 0.375 0.625 0.438 0.109 F031-F B-1N GN-031 CN-018
4
 0.312 0.188 0.438 0.625 0.438 0.109 F031-F B-1N GN-031 CN-018
5
7
 Recommended Hardware Part Number
8
 Speed Clip – Mild Steel SAG-001
8
 Speed Clip – Stainless Steel SAG-002
8
 Speed Clip – Aluminum SAG-003
8
 Setting Caps – Aluminum SAG-004
8
 Setting Tool SAG-005

To order or specify give: Stud Code, Dimensions D x L; A, Material and Quantity
Example: TAG .312 x 7/8, .437, (BW), Mild Steel, 4000 pcs.
Specify (L) Length on a Before Weld basis by indicating “BW”
or on an After Weld basis by indicating “AW.”