Rectangular – 2 Tine Wiggle Weld Studs

Add to Quote List
Category: Tag:

Complete Stud Welding R2W weld studs are available in mild steel and stainless steel materials.

Like the R2W studs, RW studs are used to secure refractory materials. The bends in the R2W stud help to preclude slippage of the refractory material when in service.

To stud weld RW studs, rectangular chucks, standard foot pieces and standard ferrule grips are typically used.

For application, dimensional and in stock assistance, please contact your Complete Stud Welding representative.

Rectangular 2 Tine Wiggle Weld Studs_Image1


A B C D E F G H I J
1
 Stud Specifications Standard Accessories
2
 Thickness Width Length
Range*		 Tine
Length**		 Wiggle
Length		 Slot
Width		 Ferrule Foot Grip Chuck
3
 T W L TL S SW P/N P/N P/N P/N
4
 0.125 0.625 2.125 – 3.0 1.625 1.031 0.156 F062-R1 B-2N GC-075 CR-CC
5
 0.125 0.625 3.125 – 4.0 2.625 1.031 0.156 F062-R1 B-2C GC-075 CR-CC
6
 0.125 0.625 4.13 – 7.13 3.25 1.031 0.156 F062-R1 B-2C GC-075 CR-CC
7
 0.125 0.625 5.50 – 8.50 4.625 1.031 0.156 F062-R1 B-2C GC-075 CR-CC
8
 0.125 0.625 6.88 – 9.88 6 1.031 0.156 F062-R1 B-2C GC-075 CR-CC
9
 * For lengths over 3”, the split foot and split grip accessories are depicted.
10
 ** Tine Length determines whether 1, 2 or 3 wiggles will be provided.

 

To order or specify give: Stud Code, T x W x L, Material and Quantity
Example: R2W, 0.125 x 0.625 x 6, (BW), mild steel, 3000 pcs.
Specify (L) Length, on a Before Weld basis by indicating “BW”
or on an After Weld basis by indicating “AW.”