CD Threaded Non Flanged Weld Studs

CD Threaded Non Flanged Weld Studs_Image1

The Capacitor Discharge (CD) Stud Welding process is designed for welding CD type studs to sheet metal with little to no reverse side marking.

The ARC- Short Cycle process is also used to weld CD type studs to sheet metal and plate.

The smaller flange diameter allows for smaller diameter holes in components to be mounted on welded studs.

For assistance contact your Complete Stud Welding representative.

CD Threaded Non Flanged Weld Studs_Image1



A B C D E F G H I
1
Stud Specifications Standard Accessories
2
Thread
Size
Stud
Diameter
Flange
Diameter
Min. Length B Collet
Standard
1-3/8” Long
B Collet
Short
1-3/16” Long
Long Collet
2-3/8” Long
Euro Collet
1.80” Long
Collet Inserts
1-3/4” Long
3
C Z D L P/N * P/N * P/N ** P/N P/N ***
4
4-40 0.112 0.116 0.25 CDB-010 CDB-010A CDBN-010 CDBS-010 CI-010-XXX
5
6-32 0.138 0.142 0.25 CDB-013 CDB-013A CDBN-013 CDBS-013 CI-013-XXX
6
8-32 0.164 0.168 0.25 CDB-015 CDB-015A CDBN-015 CDBS-015 CI-015-XXX
7
10-24 0.19 0.194 0.25 CDB-018 CDB-018A CDBN-018 CDBS-018 CI-018-XXX
8
10-32 0.19 0.194 0.25 CDB-018 CDB-018A CDBN-018 CDBS-018 CI-018-XXX
9
1/4-20 0.25 0.252 0.25 CDB-025 CDB-025A CDBN-025 CDBS-025 CI-025-XXX
10
5/16-18 0.312 0.315 0.5 CDB-031 CDB-031A CDBN-031 CDBS-031 CI-031-XXX
11
3/8-16 0.375 0.38 0.5 CDB-037 CDB-037A CDBN-037 CDBS-037 CI-037-XXX
12
* Note, requires B Stop, see Accessories for details
13
** Note, Requires Long Style Stops, see Accessories for details
14
*** Note, Collet Inserts are specific to stud length, see Accessories for details